Shimano Tiagra FC-4700 Chainring - 36t | 110 BCD
What Is the Shimano Tiagra FC-4700 Chainring 36t and When Do You Need It?
The FC-4700 36t is the inner chainring for Shimano's Tiagra FC-4700 2x10 compact road crankset, designed to run paired with a 52t outer ring on the 110mm asymmetric BCD bolt circle that defines the FC-4700 crankset architecture. This chainring is not interchangeable with older 4-bolt 130mm BCD or 104mm BCD mountain road chainrings: the FC-4700 uses a 5-bolt 110mm BCD that is specific to this generation of Shimano road compact cranksets. The tooth profile is shaped to Shimano's Hyperglide shifting geometry, with ramps and pins positioned on the ring's face to catch the chain smoothly during upshifts from the small ring to the large ring, reducing the effort and dwell time required for a clean front shift under load.
At 36t, this ring is the standard inner compact for the FC-4700 and is the replacement to reach for when the ring shows hooked or asymmetric tooth wear, or when the bike is shifting slowly or skipping on the front derailleur. Chainring replacement on the FC-4700 requires a standard 4mm or 5mm hex wrench and follows Shimano's standard chainring bolt torque specification. This ring is specified for use with a 52t outer chainring on the FC-4700 crankset and maintains the correct chain line and front derailleur trim positions that the Tiagra groupset is designed around. For Tiagra FC-4700 riders replacing a worn inner ring, this is the correct OEM-spec replacement.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Shimano Tiagra FC-4700 Chainring - 36t | 110 BCD
Shimano Tiagra FC-4700 Chainring - 36t | 110 BCD
What Is the Shimano Tiagra FC-4700 Chainring 36t and When Do You Need It?
The FC-4700 36t is the inner chainring for Shimano's Tiagra FC-4700 2x10 compact road crankset, designed to run paired with a 52t outer ring on the 110mm asymmetric BCD bolt circle that defines the FC-4700 crankset architecture. This chainring is not interchangeable with older 4-bolt 130mm BCD or 104mm BCD mountain road chainrings: the FC-4700 uses a 5-bolt 110mm BCD that is specific to this generation of Shimano road compact cranksets. The tooth profile is shaped to Shimano's Hyperglide shifting geometry, with ramps and pins positioned on the ring's face to catch the chain smoothly during upshifts from the small ring to the large ring, reducing the effort and dwell time required for a clean front shift under load.
At 36t, this ring is the standard inner compact for the FC-4700 and is the replacement to reach for when the ring shows hooked or asymmetric tooth wear, or when the bike is shifting slowly or skipping on the front derailleur. Chainring replacement on the FC-4700 requires a standard 4mm or 5mm hex wrench and follows Shimano's standard chainring bolt torque specification. This ring is specified for use with a 52t outer chainring on the FC-4700 crankset and maintains the correct chain line and front derailleur trim positions that the Tiagra groupset is designed around. For Tiagra FC-4700 riders replacing a worn inner ring, this is the correct OEM-spec replacement.
Original: $19.99
-70%$19.99
$6.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
What Is the Shimano Tiagra FC-4700 Chainring 36t and When Do You Need It?
The FC-4700 36t is the inner chainring for Shimano's Tiagra FC-4700 2x10 compact road crankset, designed to run paired with a 52t outer ring on the 110mm asymmetric BCD bolt circle that defines the FC-4700 crankset architecture. This chainring is not interchangeable with older 4-bolt 130mm BCD or 104mm BCD mountain road chainrings: the FC-4700 uses a 5-bolt 110mm BCD that is specific to this generation of Shimano road compact cranksets. The tooth profile is shaped to Shimano's Hyperglide shifting geometry, with ramps and pins positioned on the ring's face to catch the chain smoothly during upshifts from the small ring to the large ring, reducing the effort and dwell time required for a clean front shift under load.
At 36t, this ring is the standard inner compact for the FC-4700 and is the replacement to reach for when the ring shows hooked or asymmetric tooth wear, or when the bike is shifting slowly or skipping on the front derailleur. Chainring replacement on the FC-4700 requires a standard 4mm or 5mm hex wrench and follows Shimano's standard chainring bolt torque specification. This ring is specified for use with a 52t outer chainring on the FC-4700 crankset and maintains the correct chain line and front derailleur trim positions that the Tiagra groupset is designed around. For Tiagra FC-4700 riders replacing a worn inner ring, this is the correct OEM-spec replacement.
